Re: Old Ford flail mower rebuild help

Posted by Mike M on June 14, 2006 at 09:32:10 from (24.140.28.219):

In Reply to: Old Ford flail mower rebuild help posted by BobReeves on June 13, 2006 at 15:38:30:

I have one that is 5 1/2 feet wide cut. These do a really good job and I won't go back to a brush hog after using one.

The one I have now was patched on the inside of the back with an angle iron. This was not good because it moved in closer and some of the knifes hit it. Was able to stop it hitting for now by getting rid of the worn spots in the hangers by building them up with weld. This let the knifes hang down farther.

My local Ford dealer keeps parts on hand for these as alot of road crews use them as they are alot safer when you hit something.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]