Re: polarizing a A/C G

Posted by John T on June 11, 2006 at 08:11:01 from (66.244.90.5):

In Reply to: polarizing a A/C G posted by landb on June 11, 2006 at 06:54:43:

Land, You're correct, you can EITHER momentarily flash/jump at the Cutout Relay on its BAT and GEN (or ARM) terminals, or else simply momentarily flash jump any hot ungrounded battery voltage source (such as the terminal on a starter switch where the battery cable attaches) or the BAT terminal on the Cutout Relay (it has hot ungrounded battery voltage on it) etc. direct to the gennys ARM post and you should get a small spark. Although the gennys Field should already be grounded via a light switch type controller or a Voltage Regulator, one could ground the gennys Field post direct to the case/frame if necessary.

John T

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]