Re: OT: Furnace Blower Problems

Posted by Martini on June 05, 2006 at 12:13:42 from (192.35.35.42):

In Reply to: OT: Furnace Blower Problems posted by Buzzman72 on June 05, 2006 at 06:45:50:

I would refrain from trying to use the AC until
the circulation fan is active again. You are
right in your troubleshooting method. Check for
power the work back to the control card. Sometimes the thermostat has a manual/auto switch
as well. If there is no power to the fan, you could remove the wire to the fan and add a fused
connection to a 120VAC outlet until you can save up for a control module. There is likely a solid-
state relay on it which has gone 'south'.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]