Re: replacing carb on JD 1010

Posted by Glen in TX on June 03, 2006 at 09:49:17 from (208.246.9.230):

In Reply to: replacing carb on JD 1010 posted by lloyd in sc on June 03, 2006 at 06:40:13:

The new Zenith is a better later design but none will work well with old cruddy gas and dirt in tank. For the JD 1010 & 1020 the Zenith 12566 should be a good direct fit bolt on but the Zenith 14996 is a universal fit carb with universal throttle linkage that has to be made to fit once you get the carb. The rebuilt Marvel Schebler should also be a ready direct bolt on change and should work well if it was rebuilt correctly. Parts are still readily available for the M/S TSX carbs. Some older M/S carbs were a poor design but the TSX was a good one.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]