Re: Hot Hydraulics

Posted by Paul Janke on June 03, 2006 at 06:57:18 from (216.166.168.53):

In Reply to: Hot Hydraulics posted by phil lowe on June 03, 2006 at 04:52:59:

It sounds like he is going straight to the valve on the skidder which is good. I am guessing that the problem is from friction in lines which are too small and too long going to and from the splitter. Shorter and bigger lines are much better. Large quick couplers also help. It can also help to run the return line from the splitter back to the skidder somewhere after the valve like directly to the reservoir. It is best to make sure there is still a filter in the circuit, even if it is on the splitter.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]