2-71 injector timing for John Starnes

Posted by NC Wayne on May 31, 2006 at 20:54:44 from (152.163.100.74):

Hey John, sorry it took me so long to get back to you with this info. I looked it up over the weekend and tried several times Monday and yesterday to post but for some reason couldn't get a post to come up on this board. Don't know what the problem was. Anyway, the injector timing height for a 2-71 with N65 injectors is 1.460. That should give you a rated BHP of 64 HP at 2000 RPM. If you want to gain an extra 4 HP you can substitute a N70 injector at the same timing. Hope this helps and again I apologize for taking so long to get the info to you. Good luck with your engine. By the way, what's it in? I know some of the old A/C machines like an HD5, I believe it was, used them so I was just curious.

Replies:

• Re: 2-71 injector timing for John Starnes John Starnes 03:46:11 06/01/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]