Bell Crank for super-c

Posted by Don's superc on May 15, 2006 at 10:26:36 from (66.153.65.209):

Does anyone out there have a pattern for making a Bell Crank (or
know where I can get one) to fit the assembly for a super-c fast
hitch? Any information on this would be appreciated. In 2003 I
purchased a Super-C that had a fast hitch come with the tractor. A
sickle bar mower was mounted on the axles and thrown in with the
deal. The Fast Hitch was not being used and is in new like
condition but the Bell Crank was missing. I would like to modify
this mower to use the fast hitch. Has anyone ever attempted this?

Replies:

• Re: Bell Crank for super-c Turk 10:41:40 05/15/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]