Re: 1943 farmall H

Posted by Dennis Duquette on May 02, 2006 at 18:09:07 from (71.126.7.131):

In Reply to: Re: 1943 farmall H posted by eric rogers on April 24, 2006 at 16:46:33:

Yes I found that when I put a timming light on it was loosing spark and then if the spark came back fast enought it would continue to run. Any way I unbolted the mag. and took the assembly off when I removed the points they were pited. Then I took the coil out then when I removed the nut and removed the condenser I found that the wire comming from the coil was not on the condenser stud but under the stud I hope this was the problem. I put new points in and gaped them at .020 is that right.
Thanks Dennis

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]