Re: ROPS

Posted by JDknut on April 20, 2006 at 03:58:34 from (152.119.204.79):

In Reply to: ROPS posted by Dan-IA on April 19, 2006 at 20:38:10:

A ROPS is actually a carefully engineered system for any particular tractor it is used on. It has to take into account dynamic forces from the rollover and also withstand cold weather conditions, as cold temperatures make steel brittle. The mounting of the ROPS to the tractor is critical. I designed and had one built for a White tractor, and now have an aftermarket one on my Deere. I used structural tubing, 50,000 psi and full penetration welds where possible. The best thing would be to have an aftermarket company supply one that is specific to your tractor. I am not sure, tho if there is one to fit a tractor as old as yours. You could probably get someone to design and build one, but it will have to be engineered, or do it youself if you have the capability. Mine cost about $500.00 but then I did the engineering and drawings. I wish you luck on this, and a ROPS is definitely a good idea, wouldnt be without one. ALso, if you have a canopy on the ROPS, it is useful for protection from falling objects if you use the tractor in the woods

Replies:

• Re: ROPS David Bate 13:20:48 04/20/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]