Re: question ... removing tie rod end ???

Posted by Allan In NE on April 19, 2006 at 15:48:51 from (148.78.243.25):

In Reply to: question ... removing tie rod end ??? posted by MMB on April 19, 2006 at 14:21:54:

MM,

Like the other guys say, a picklefork is the easiest way. If you don't have one and if you can get a swing at that socket, smack it on the side with a good-sized hammer and it will pop loose. Helps if you can put out-pressure on the wedge bolt too.

When I worked fer the last Chevrolet garage, they wouldn't let us use the pickleforks because we always had to "save" the tierod and dust boot. So, I got in the habit of just using a hammer.

Allan

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]