47 allis chalmers b universal zenith carb 12522

Posted by sal bartolotti on April 17, 2006 at 16:45:19 from (208.59.181.182):

I boughT a universal zenith carb 12522 from Yesterdays tractor went to install could not install becuase the shaft for the throttle on the back side of the carb stuck out too far. Called in to Yesterdays tractor today and asked them if this is normal they said it should fit right on without any trouble but this is not the case!! I talked to david over there at Yesterdays tractor he siad that I have to cut the shaft down so it will clear the block hence the name universal carb!! I want to know if anybody else has experienced this and if I should have to cut that portion of the threaded rod!

Thanks

Replies:

• Re: 47 allis chalmers b universal zenith carb 1252 Glen in TX 19:57:01 04/17/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]