Re: Rust Bustin

Posted by John A. on April 06, 2006 at 16:16:36 from (65.161.172.149):

In Reply to: Rust Bustin posted by OK PSU Kid on April 06, 2006 at 15:52:35:

OK kid, I prefer pulling the head and pouring in diesel with a spash of gas then set each cylinder on fire the heat will expand the sleeve from the piston just enough to get it loose.
remove the pan, and take loose the rod caps so each cylinder can be done independantly of the others.
Of course removeing all famable materials and such from the tractor and area, roll the tractor outside too.
How are things @ Goodwell, OK? Go eat at K-bobs for me.
Later,
John A.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]