Re: IH 806 hydraulics

Posted by the tractor vet on April 05, 2006 at 18:51:00 from (64.179.117.9):

In Reply to: IH 806 hydraulics posted by Kevin 846 on April 05, 2006 at 18:15:17:

Pull the toop link cover off the back the one with the 6 bolts and get a lite in there and on the right hand side there is and arm that comes up from the bottom on the tourshion bar and there is and arm comming down from the top the top arm is suppose to go on the back side of the bottom one , Now use caution as is has a heay spring holding it foward , now if you pull the draft control lever all the way back and hold it in the rear posision it will take some of the tenshion off the arm and you can pull it back but use a hook as things can be sharp and you could loose a finger

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]