|
Tractor Talk Discussion Board |
Re: OT:How are you cutting it??
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by barnrat on March 18, 2006 at 09:19:42 from (12.39.89.157):
In Reply to: OT:How are you cutting it?? posted by TomMan on March 18, 2006 at 08:44:21:
I started farming "full" time almost 6 years ago. 3 years previous to that I bought jersey heifer calves. I bartered and traded different farmers to raise them form me while I turned wrench at a local tractor dealership. I chose dairy farming partly cause I grew up on a dairy farm and partly cause dairy cows have the most income potential per acre. One thing I found to be most helpful is to not listen to the old timers and their "If I didn't do it and my dad didn't do it, it can't be done" rant. Whatever type of farming you choose do as much research as you possibly can. With livstock low input practices like Managed Intesive Rotational Grazing is king. Grazing pays my bills on my 60 cow dairy and makes my neighbors envious of my bottom line. I do make money on the side fixing tractors only cause the farm I'm renting(and soon to buy)has a good shop. I live by one quote "If you always do what you always have done. You will always be where you always have been." Good luck.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|