Re: There, That's Done

Posted by Chad Franke on March 07, 2006 at 06:30:38 from (65.112.203.194):

In Reply to: Re: There, That's Done posted by Allan In NE on March 07, 2006 at 06:18:09:

Nah, not a drill fill (Although I think I've got one of those too if you are interested), this goes down IN the bed, right along the corner that would be the lowest point when the bed is tilted on it's side, all the way from front to back. One side is left hand, other is right hand pitch, so both sides pull to the middle. A hydraulic motor sticks out through a notch cut in the front board to drive it. It pulls grain from the corners (front and back) to the middle, where the big chute usually is. I'll see if I can dig up a picture if that would help.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]