Re: JD 4430 HYDRAULICS

Posted by txgrn on March 04, 2006 at 06:27:00 from (12.39.110.35):

In Reply to: JD 4430 HYDRAULICS posted by SDALP on March 03, 2006 at 05:13:38:

Agree on your drain back. Not restricted to the 4430, nor Deere. Common occurrence; longer it sits and colder it is the worse it is.

Solution could be to insure that your lift and anything else hydraulic is in the lowered position and leave it there till the fluid has had time to circulate.

Had one tractor that I thought I needed mains cause of bad noises at startup (I'm kinda real deaf). Turned out it was nothing more than my hydraulics coming up to position rattling like you mentioned.

Beins I had just paid $17k for that thing I was real glad I had misdiagnosed the noise; real glad....especially since the tractor only had 3900 hrs on it.

Mark

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]