Re: Tank type engine heaters

Posted by Hugh MacKay on February 18, 2006 at 05:35:26 from (209.226.247.128):

In Reply to: Re: Tank type engine heaters posted by Stickler on February 18, 2006 at 05:18:09:

Stickler: I am not familiar with Farmall 6 cylinder gassers. I only ever saw one in my life, and that was a 460 many years ago. My two 282 diesels were in 560 and 656. Those diesel heads had a port above each cylinder into the water chamber. Those ports were aprox 1". They had a large plug one could remove with square end of 1/2" drive handle. I remember I had to make up fittings to get it to size and so it wouldn't protrude enough to catch items brushing by tractor.

These work very well, the down side is they rust out. About 6 years you change them or you find antifreeze on ground some morning.

Replies:

• Re: Tank type engine heaters Stickler 09:14:00 02/18/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]