Re: welding cast iron info

Posted by george md on February 08, 2006 at 14:04:50 from (12.191.226.99):

In Reply to: welding cast iron info posted by INcase on February 08, 2006 at 07:16:51:

Incase,

If you would like to read the how and why
of cast iron welding that is written by a fellow
who does much cast repair rather than by someone
who is in the biz of selling welding supplies,
you should read the link below .It is written by
Gary Reed who not only welds cast (mostly oxy/
acetylene) and who designed and patented the
lock-n-stitch repair tools. His brother Guy Reed
showed up here on the board a year or better ago
with some pictures of manifold repair very similiar to what I do .

http://www.locknstitch.com/CastIronWelding.htm

Below are url's to some cast repair that I did.

http://www.georgemillermachine.com

http://www.imageevent.com/gmachine

george

• lock-n-stitch

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]