Re: Sandblasting wheels

Posted by TomTX on February 08, 2006 at 10:30:01 from (12.74.216.16):

In Reply to: Sandblasting wheels posted by 1 Dollar on February 07, 2006 at 17:50:31:

This depends if you are refinishing the wheels for your long-term use, or just painting to sell the tractor. I usually remove the tire/tube and use a 4 1/2 inch angle grinder with wire brush and refinished both the outside and the inside of the wheel. I have found that the inside sometimes needs refinishing worse than the outside, such as when you have used slime leak stoppers in tubeless tires - it can really pit up the inside of the wheel. Tom

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]