Re: How Big of disc

Posted by hayray on April 02, 2006 at 05:37:38 from (216.234.123.56):

In Reply to: How Big of disc posted by TJH on April 01, 2006 at 14:31:29:

You should be able to pull anything up to 14 ft. for a light finishing disk on dry ground and I would think you could cruise with almost any 12 ft. disk, they are usually light at that size. Years ago I pulled a 10 ft. Oliver disk with a 40 horse JD 60 and it saled with it, then my 1655 Oliver at 70 HP pulled the 10 ft. disk like it was not even there. Now I pull a 18 ft. Krause disk behind a 110 hp and it is all it can handle but there is no comparison in the weight and engeneering of the disk.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]