Tractor Talk Discussion Board |
Re: Re: finish mower
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Tim(ny) on June 29, 1999 at 07:08:06 from (165.89.84.249):
In Reply to: Re: finish mower posted by Tom on June 28, 1999 at 07:14:13:
If all else fails you could safety wire it. Drill a small hole from one face of the nut to an adjacent face, then repeat this on the opposide side of the nut. Then drill a small hole through the bottom of the stud. Connect the three holes with a fine wire. Or get a crown nut and cotter pin, or a lock nut.
Follow Ups:
Post a Followup
|