hedders again!

Posted by Tim Shultz on March 28, 2006 at 17:32:05 from (71.51.121.208):

I got the old manifolds off now.. was a pain. took two days! lol but no snapped bolts at all. so other than taking a lot of time,(becouse it was a bit of a pain to get to the bolts) it wasn't bad at all. and a few guys had said to leave the manifolds on. but they where cracked and I had a pair of hedders anyhow. but got them in place and am going to bolt them up as soon as I get a chance. but got a question. the bolts on the top of the manifolds where bent a bit, like they where a low grade bolt. but should I get grade 8 bolts or should a use a lower grade? so the bolts give and not my hedders? or did the last guy just skimp on bolts? I was thinking 8 was the way to go. THANKS! Tim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]