Block Removel off 1951 John Deere A

Posted by tracker on March 21, 2006 at 19:35:21 from (12.189.32.37):

I currenly baught a 1951 John Deere A. The motor is stuck so tight that we can't find anything to loosen it up. We tried everything, all of the old tricks, so, last resort, we started pulling the block out so we can manhandle it somemore. Anyway, I pulled off the block bolts, and the head is off. The block is ready to be taken out. But, do I need to separate the frame to get the block out or can I squeeze it out of the bottom of the frame? Any ideas? Thanks in advance!!!

Replies:

• Re: Block Removel off 1951 John Deere A CalJim 21:19:02 03/21/06 (0)
• Re: Block Removel off 1951 John Deere A ebbsspeed 20:00:43 03/21/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]