Re: sears craftsman model 131.96315

Posted by rustyj14 on January 17, 2006 at 09:21:40 from (209.195.143.192):

In Reply to: sears craftsman model 131.96315 posted by new beginnings on January 16, 2006 at 22:10:16:

Look on the flywheel housing, the tin piece! on the side, rear, or near the rounded part over near the cylinder head are some letters and numbers. I.E.: Type, model, code, or words/numbers like that. You might have to sand thru any rust or scrape off the dirt. These are the numbers you must post here. The numbers you posted are the Sears mfgr. numbers, and only should be used for info on the mower itself, not the engine!
Some of the older engines had an aluminum plate on the cylinder with the info there, and i have even seen a sticker glued on someplace, on newer engines, which soon becomes useless!
Rusty

Replies:

• Re: sears craftsman model 131.96315 new beginnings 13:39:27 01/17/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]