Re: track and roller door

Posted by dan hill on January 15, 2006 at 02:39:42 from (205.188.117.14):

In Reply to: Re: track and roller door posted by J.C. IN AZ. on January 12, 2006 at 08:11:49:

I have had plenty of problems with square door track for over 40 years.The hanger bolts rub on the the track and wear thru.The square track is made with light gauge steel and it bends inward and falls out of the brackets.I put a 4x8 door up on Cannon ball track.It runs so easy that the wind can push it along the track.Try this with square track.I put an inside hook latch on the door to keep it shut.This keeps the door from flapping in the wind.I have 2 more 4x8 doors to put up, they will be using cannon ball track.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]