Re: lift-all

Posted by riverbend on January 14, 2006 at 15:48:03 from (208.160.33.59):

In Reply to: lift-all posted by jack w on January 14, 2006 at 14:57:10:

It is easy, except for the pump being so dang heavy.

Drain the hydraulic oil. Remove the output plumbing. Remove the filler cap and plug the pipe. Remove the drive couplings and pump drive shaft. Support the pump, and remove the mounting bolts. Be careful not to get any dirt in the fill pipe or the output ports when the pump falls off the jack as you try to lower it.

If you are going to do much in the way of maintenance or repairs, getting a manual will make it much easier.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]