Posted by Denny on February 19, 1998 at 05:55:46:
In Reply to: Allis WD hydraulics posted by Dennis Tetzloff on February 18, 1998 at 16:08:47:
Yes. The easiest way is to put a T into the lines for the existing cylinders and then to
the loader cylinders. Some don't like this because the lift arms in the back either go all
the way up and stay there or move up and down when the lever is moved. I've seen some where
the output from the pump is sent to a 4 way valve which selects either the loader or the lift
arms.
Regards and good luck,