Re: track and roller door

Posted by Bill in NorthCentral Pa on January 12, 2006 at 07:10:04 from (209.50.143.180):

In Reply to: track and roller door posted by ross in ns on January 12, 2006 at 03:56:04:

For every door I've built, I make the door wider than the opening by the width of the end rail - that is to say if I used 2x4, I made the door 3 1/2" larger each side. This allows for a cam style door keeper to be fastened into the horizontal rail (often times comes with a bracket to strengthen the rail).

Good luck,

Bill

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]