Re: john deere

Posted by G/MAN on January 10, 2006 at 15:26:14 from (67.52.48.10):

In Reply to: john deere posted by mno on January 09, 2006 at 18:38:22:

You heard them referred to as "hit and miss" because the person doing the referring to either doesn't know what he's talking about, or was making a smart remark. John Deere two-cylinder tractor engines have always been throttle-governed, never hit-and-miss engines at all. "Hit-and-miss" refers to any of the old single-cylinder gas engines that weren't throttle governed at one speed, and would speed up and slow down as they operated. Once the speed dropped sufficiently, the engine would "hit" once or twice to bring the speed back up, then the engine would coast and "miss" for a few revolutions until the speed dropped off again.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]