Re: Who engineered this????

Posted by Billy NY on January 09, 2006 at 07:22:36 from (64.12.117.7):

In Reply to: Who engineered this???? posted by Roy Suomi on January 07, 2006 at 20:53:22:

Some interesting information, I've got a short fleetside box '96 F-150 4x4 with the 300 six, pan is probably the same on this one. Years ago also had the 78 Monza, but with a 4 cyl. To change the fuel pump, you have to unhook that side engine mount and jack the engine up, I was thinking the same about the designers at the time but now that I think about it, it was not so bad, and having an understanding of the engineering world, I'm sure there are challenges to make things work in the automotive industry, like in the construction industry, just that the end user would like to know things like this up front I suppose. I have always said that designers need some field exposure, it certainly would help them, this is especially true in the construction industry. Some items may be mis-coordination and others may be oversight, it happens in a lot of industry, kind of hard to bash the designer unless you have all the facts about it. I do know how it feels to wrestle with something that appears could have been made easier to work on, while out in the elements cold, snow, rain, letting it get you angry never helps in getting it done though, just more work and the sooner you get it done, it's over.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]