Re: How to figure out what a front end loader with

Posted by Jonfarmer on January 05, 2006 at 13:38:24 from (64.91.162.205):

In Reply to: How to figure out what a front end loader with fit posted by Nathan in Texas on January 05, 2006 at 11:25:10:

You would have to go check out the loader and get a make and model off the serial tag, then contact a dealer that sells that brand or possibly the manufacturer and find out what it was designed for. I'll bet it is made to only fit a certain model tractor unless it's the kind that have side plates, then you just cut the bolt holes in a different spot for different tractors. but I doubt it because this loader wouldn't be a quick tach with the pump in the front. I'd suggest just looking for a used loader tractor, you can get a small one for less than $3,000 if you keep watch and go to auctions.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]