|
Tractor Talk Discussion Board |
Re: Water Well Problems 2
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by bhb on December 25, 2005 at 12:03:42 from (68.69.222.69):
In Reply to: Water Well Problems 2 posted by john in la on December 25, 2005 at 06:56:11:
Merry Christmass, I am at a loss how you can lift water 225 feet with a one pipe system unless the water level is less then 25 feet from the pump level. Be carefull if you pull that pipe out of the well it will be very heavy if it has water in it. You can get a pressure switch that will turn the pump off if the pressure falls below 20#. These are used on cisterns to turn the pump off if you run out of water. It has to be reset to start the pump. The check valve at the pump should kept the pump from loosing prime. The only thing that I can think of your loss of water is none of you faucets are leaking they will act like check valves. If the pump looses prime do to the weight of the water pulling away from the pump, when you turn on the house water the water runs back into the pump and reprimes it. This is only a wild a** guess. I would replace the pressure switch with the automatic one. I will be interested to hear of what you find. Bill
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|