Re: your farm shop

Posted by Gene Davis (Ga.) on December 16, 2005 at 18:37:19 from (66.82.9.81):

In Reply to: your farm shop posted by rick YYC on December 15, 2005 at 12:57:08:

I dug a 2' deep hole with my hand post hole diggers and planted a length of 4" steel pipe that had 2" angle iron welded to it at 90 degree angles in the floor where my welding area was to be. When I poured the floor, I then had a secure mounting leg for the vise end of my 1/2" steel plate welding table. The other end of the table is supported by 1/4" X 2" angle iron legs. The pipe anchors the vise end so that when you get to really hammering away on something or pulling on it you don't have to keep chasing the welding table.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]