Re: Briggs and Stratton Crankcase Gasket Replaceme

Posted by doogdoog on December 06, 2005 at 11:07:09 from (24.161.156.75):

In Reply to: Briggs and Stratton Crankcase Gasket Replacement posted by Vinnie from NC on December 06, 2005 at 08:06:16:

Aloha,
For a more permanent seal, I would use the silicone type. If you want to remove it every so often and use the same gasket, you could use the indian head on the pan side and grease on the block side. That way, the gasket stays on the pan and usually releases on the block side (usually and not always). One thing to add is not to tighten it too much or you will distort the pan.

Mahalo,
doogdoog

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]