Re: No Rock Throwin', Please

Posted by Harley on December 06, 2005 at 07:46:37 from (152.163.101.7):

In Reply to: No Rock Throwin', Please posted by Allan in NE on December 06, 2005 at 07:33:01:

No rock throwin here big guy, but you would never be happy with those bolts sticking out there. We know you. Get a piece of angle iron big enough at least on the bottom side, bolt it to that red panel behind where your light is noe, so the bottom of the angle sticks out like a shelf, then drill a hole through that and bolt your light on to it. It sure could be light weight stuff, not like quarter inch or anything, just enough to hold the light. That way it will all be under the fender and you won't be catching your hand on that bolt stub sticking out and more important to you, you won't be looking at it every time you get on the tractor. Just trying to save you from yourself here, Harley

Replies:

• Re: No Rock Throwin', Please Allan in NE 07:53:31 12/06/05 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]