Tractor Talk Discussion Board |
Re: changing cribs to bins
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by johndeerejon on December 01, 2005 at 07:57:52 from (216.124.141.231):
In Reply to: changing cribs to bins posted by dave from MN on November 30, 2005 at 16:52:33:
This is going to sound crazy, but it worked. Several years ago we had the same problem. We wrapped the crib with 1/4 inch cable at various heights and snugged them down for added support strength. We lined the inside of the crib with hog pannels and wired them down. Then we wired chicken wire to the hog pannels. Then we zip-tied those cheap blue tarps from the local farm store to the hog pannels and chicken wire. We filled the crib slowly and it actually worked! It tore up a couple of the tarps pretty good, but it beat putting up the rings in the machine shed that year. The blue tarps also breath pretty good and we have practically no spoilage.
Replies:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|