Re: Hub on axle of model g john deere

Posted by Bob on November 17, 2005 at 18:44:55 from (64.21.249.40):

In Reply to: Hub on axle of model g john deere posted by Don Archer on November 17, 2005 at 17:03:21:

1.) Use some REAL loosen juice like PB Blaster, Kroil, or Thunderbolt. (Save the WD-40 for, well, err, well, I can't think of what you'd save it for!).

2.) When you get tired of trying to pull it off, get a section of heavy-walled pipe that will slip over the axle, and up against the hub, and whomp on it with a large "fitting tool" for a while. If it still won't budge, repeat #1, then try pulling on it again, then try #2 again 'til it lets go.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]