Re: O.T. Rifle scope problems

Posted by MarkB_MI on November 16, 2005 at 18:30:10 from (64.31.11.61):

In Reply to: O.T. Rifle scope problems posted by old on November 16, 2005 at 15:41:23:

This is a common problem with the cheaper scope mounts in rifles with heavy recoil. The best solution is to stick with high-quality rings and a good scope. You should locktite the screws (green locktite) also.

Before you jump to any conclusions, take your rifle down to the range and shoot a box of ammo from the bench. If you can't get it to hold within a couple inches at 100 yards something is seriously wrong. You can tell if the mounts are slipping by marking the spot where the ring sits on the scope.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]