Re: O.T. Rifle scope problems

Posted by Jeff Oliver on November 16, 2005 at 16:01:35 from (67.137.92.19):

In Reply to: O.T. Rifle scope problems posted by old on November 16, 2005 at 15:41:23:

before you start taking it apart take it somewhere and shoot at a target and amke sure it is still zeroed or not. If all it did was slip backwards or forwards in the rings it should have moved enough to miss a deer. Check all of the screws and make sure they are good and tight. If everything is tigh and the scope still slips in the rings take them apart and put a small pices of brass shim stock or aluminum foil or something in there to tighten the rings up a little. Doesn't take alot and I have had to do it once or twice

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]