Re: Farmall D-460 rear wheel removal

Posted by Bill46 on November 10, 2005 at 04:51:08 from (63.65.68.246):

In Reply to: Farmall D-460 rear wheel removal posted by Paul Harris on November 09, 2005 at 19:14:36:

Paul, if what the other guys gave you fails, I did as an old farmer told me. Turn a 200A welder on, place the ground on the wheel and put a layer of weld on the top of the bolt. Get it good and hot.
Let it cool and grind the weld off so it is the size it was when you started. Let the bolt totally cool for a day.
Then put your socket and breaker bar on it. You may have to use a 3/4" or 1" drive...I did. Seems the heat and voltage helped break up the rust.
I did this...and the bolts came right out.
My 2 cents...good luck.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]