|
Tractor Talk Discussion Board |
Re: O/T 87 chevy pickup
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RusselAZ on November 08, 2005 at 17:34:46 from (70.97.74.129):
In Reply to: Re: O/T 87 chevy pickup posted by Fern(Mi) on November 08, 2005 at 16:59:57:
Not so. The oil pressure switch is a redundent back up. These are in the system to keep the vehicle running until shut down if the main relay fails. It does not need oil pressure to turn on the fuel pump. There is a tap wire in the loom to use for checking fuel pressure and delivery. Put 12 volt on this from the battery and listen for the pump. Fuel injected systems that do what the poster related his is doing probably have a bad pump. When the pump doesn't put out enough pressure to bypass the regulator to the tank they do the same thing as vapor lock.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|