Re: johndeere 4010

Posted by TIMBO on November 02, 2005 at 07:25:58 from (4.155.84.19):

In Reply to: Re: johndeere 4010 posted by JDknut on November 02, 2005 at 03:32:48:

Jdknut is correct there were no 404 engines in 4010's unless installed buy its owner. I have a 1964 4020d and it's engine is pretty much the same as a 380 used in the 4010. Even the crankshaft carries the same casting numbers of R26560. Be careful that it is not a late model 404, as there are some differences. If its a later model 404 it will have a serial number tag on the block on the right hand side by the injection pump, early 404's did'nt have them. Look for a block casting number located behind the starter to be sure.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]