Tractor Talk Discussion Board |
Re: Grease seals on camper trailer wheels
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by bo on October 19, 2005 at 17:55:49 from (12.75.107.163):
In Reply to: Grease seals on camper trailer wheels posted by RayP(MI) on October 19, 2005 at 17:08:53:
I can't visualize what you're saying. A picture would help. Only way I've seen any bearings and seals is....a hub, a back seal, a back bearing in the hub riding on a race and then a front bearing riding in a race and then the washer and nut. All are individually replaceable. The grease seals are only a couple of bucks apiece and they can be taken out buy using a drift into the hub and tapping the bearing out with the seal. The race is taken out the same way. If the bearing and race are smooth and not rough, they just need repacking and reusing. The seals...pretty standard replacement items and some do have the springs you're talking about but I'm not sure that they do a whole heck of a lot. Either way....it's all replaceable. Bearing buddies go into the race from the front and they are designed to keep constant pressure on the grease in the hub. They do have springs inside them but I've never seen them deteriate. The springs themselves ....you'll probably never be able to find replacements.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|