Re: Will straight pipe hurt motors??

Posted by Logan on October 14, 2005 at 14:01:39 from (12.29.139.31):

In Reply to: Will straight pipe hurt motors?? posted by logan on October 13, 2005 at 19:54:20:

I pull at a local pull once a year with my MH 33, and plow a little with it. last year it had a muffler on durring the pull and this year i ran a straight pipe on it and did a little better than last year. About the cold air rushing in, the straight pipe and manifold are about the same temp as the motor...i mean ENGINE....am i right? and on the muffler that is for the tractor, you look down it and can see straight through it with just little things sticking out into the hole so that would be sure to still let the cold air rush in. Plus, the manifold has those sharp turns that restrict air to go out smooth, so it shouldnt let the cold air rush back in. Thats my opinion on the whole situation.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]