Re: metal siding

Posted by Snunker on October 12, 2005 at 08:15:31 from (163.231.6.67):

In Reply to: metal siding posted by memmo on October 12, 2005 at 07:14:43:

I have seen it both ways, but more often on the flats. There is some logic to putting the fasteners on the ridges on roofs. For siding, I think you get a much smoother appearence if you put a screw on either side of the ridge in the flat. There is less chance of the panel buckling between the ridges.

Of couse, you could alway check the see what the mfgr. recomends, but that's no fun!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]