Re: Ford 8000 power steering.

Posted by RodinNS on October 07, 2005 at 14:46:10 from (142.177.110.50):

In Reply to: Re: Ford 8000 power steering. posted by Ty Lee on October 07, 2005 at 07:14:06:

I haven't dealt with those particular valves, as I've not had a reason too. But, in general, a ball type relief valve can have a bad seat or simply have some dirt on the seat that will prevent proper closure. Just take it apart and look at it. If there's a problem, it should be obvious. Relief valves also tend to chatter a lot when they are blowing off. The ball will chatter on the seat as it opens and closes rapidly. I would expect that the pump gears/housing are your problem. This would not be at all uncommon. These pumps are not noted for durability.... HTH.

Rod

Follow Ups:

• Re: Ford 8000 power steering. Ty Lee 12:23:24 10/11/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]