tractor shifter

Posted by INCase on September 30, 2005 at 13:15:23 from (209.221.240.14):

THe shifter on my Case 800 has, what I think, is a lot of slop. I"m comparing this to The Case 730 which has pretty tight shift with a nice snap/click into each gear. Is the sloppy shifter due to the shifter, the yokes or the gears? I looked (as best I could) thru the holes between the trans and differential houseing with the differential cover off. from what I could see the gears looked ok but the egdes of the gears looked like the corners radially(where they would first mesh with the next gear) had been filed off. is this wear or were they made like that? If it is wear is it a problem? (haven"t opened the 730 cover yet). Any info/help/advise is appreciated. thanks

Follow Ups:

• Re: tractor shifter Gene Davis (Ga.) 19:07:41 09/30/05 (1)
  • Re: tractor shifter BobMo 06:21:40 10/01/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]