Re: power horse by eimco

Posted by AZ JackMc on September 27, 2005 at 20:41:13 from (216.39.131.31):

In Reply to: power horse by eimco posted by Ronny269 on September 27, 2005 at 11:14:24:

Eimco was made in Utah for a couple of years using a B Allis Chalmers engine with the same sheet metal as the B. The transmission was made by Eimco. The tractor had all four tires the same size and was steered like a crawler tractor with reins ran to either side of the tractor-the operator setting on the implement behind the tractor, pulling the rein in the direction he wanted to turn. Quite a unique rig-made to satisfy the farmer that could not make the shift from horses to tractors. Jack

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]