|
Tractor Talk Discussion Board |
Re: OT: boat trailer
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmer in the Dells (WI) on September 26, 2005 at 05:40:07 from (66.187.42.62):
In Reply to: OT: boat trailer posted by 2x4 on September 26, 2005 at 01:09:40:
Question is how much is your load worth to you? I would tend to trust a 10 inch trailer tire over a 15 inch p metric car tire. Generally the trailer tires contain additional plies and may have extra in the sidewall where you need it. If it were my boat going 600 miles, I would be putting whatever size the trailer manufacturer calls for and in trailer style on it. If your hauler wants to change wheels and tire sizes, make sure he has insurance and will be responsible for the load. The trailer could handle differently. The change from 10 to 12 may not even raise the trailer enough to be of any value. In this area you can probably get 4 installed for a lot less than then you think and don't forget a spare. In these parts traveling without a spare for your trailer can get you a ticket and yet I always see tireless trailers on the side and owners off looking for a tire. I shake my head wondering what the owner is thinking running a $20K ski boat or $15k snowmobile setup and didn't spend $40 on a spare. If you were going 6 miles, no question, but 600? Get what you need before it costs you a lot more than you figure on saving. Just my 2� and keep the change. HTH
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|