Re: Marvell-Shebler TSX type B carb

Posted by doogdoog on September 23, 2005 at 21:57:32 from (24.161.156.75):

In Reply to: Marvell-Shebler TSX type B carb posted by Don E. Foster on September 23, 2005 at 18:51:33:

Aloha,
I don't know anything about that carb but maybe I can still help. If you have to blow into the line to make it work, (did you check for a clogged line?) I would assume that the needle valve is working as it should but the float could be maladjusted. Actually, if the bowl was full, you wouldn't be able to blow any fuel into the carb.I think by adjusting the float 1/4" to make it work doesn't seem right. Did you adjust the float with the gauge according to spec?? When it ran, was it running rich (black smoke)? Does it idle ok? What about high speed? I think that the problem may be with the low speed fuel system. I would adjust the float again and examine the low speed fuel system again.

Mahalo,
doogdoog

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]